8
Important Notes
WAGO-I/O-SYSTEM 750
750-881 Programmable Fieldbus Controller ETHERNET
Quickstart Reference
Version 1.0.1
Pos: 11 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Wichtige Erläuterungen - Überschrift 1 @ 4\mod_1241428899156_21.doc @ 32170 @ 1
2 Important
Notes
Pos: 12.1 /Alle Serien (Allgemeine Module)/Wichtige Erläuterungen/Einleitung Wichtige Erläuterungen @ 3\mod_1221059818031_21.doc @ 21717 @
This section includes an overall summary of the most important safety
requirements and notes that are mentioned in each individual section. To protect
your health and prevent damage to devices as well, it is imperative to read and
carefully follow the safety guidelines.
Pos: 12.2 /Alle Serien (Allgemeine Module)/Überschriften für alle Serien/Rechtliche Grundlagen - Überschrift 2 @ 3\mod_1221060626343_21.doc @ 21726 @ 2
2.1
Legal Bases
Pos: 12.3 /Alle Serien (Allgemeine Module)/Wichtige Erläuterungen/Änderungsvorbehalt @ 3\mod_1221060036484_21.doc @ 21720 @ 3
2.1.1
Subject to Changes
WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any
alterations or modifications that serve to increase the efficiency of technical
progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from
the granting of patents or from the legal protection of utility patents. Third-party
products are always mentioned without any reference to patent rights. Thus, the
existence of such rights cannot be excluded.
Pos: 12.4 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Personalqualifikation 750-xxxx @ 3\mod_1224061208046_21.doc @ 24063 @ 3
2.1.2
Personnel Qualifications
All sequences implemented on Series 750 devices may only be carried out by
electrical specialists with sufficient knowledge in automation. The specialists
must be familiar with the current norms and guidelines for the devices and
automated environments.
All changes to the coupler or controller should always be carried out by qualified
personnel with sufficient skills in PLC programming.
Pos: 12.5 /Serie 750 (WAGO-I/O-SYSTEM)/Wichtige Erläuterungen/Bestimmungsgemäße Verwendung 750-xxxx @ 3\mod_1224064151234_21.doc @ 24070 @ 3
2.1.3
Use of the 750 Series in Compliance with Underlying
Provisions
Couplers, controllers and I/O modules found in the modular WAGO-I/O-
SYSTEM 750 receive digital and analog signals from sensors and transmit them
to the actuators or higher-level control systems. Using programmable controllers,
the signals can also be (pre-)processed.
The components have been developed for use in an environment that meets the
IP20 protection class criteria. Protection against finger injury and solid impurities
up to 12.5 mm diameter is assured; protection against water damage is not
ensured. Unless otherwise specified, operation of the components in wet and
dusty environments is prohibited.
Appropriate housing (per 94/9/EG) is required when operating the WAGO-I/O-
SYSTEM 750 in hazardous environments. Please note that a prototype test
certificate must be obtained that confirms the correct installation of the system in
a housing or switch cabinet.
Pos: 12.6 /Alle Serien (Allgemeine Module)/Wichtige Erläuterungen/Technischer Zustand der Geräte @ 3\mod_1221060446109_21.doc @ 21723 @ 3
