Quick-Start
Guide
•
9
Ethernet Network Start-Up
WAGO-I/O-SYSTEM 750
Telecontrol Quick-Start Manual
Fig. 2: Node with the 750-872 telecontrol fieldbus controller
2.2 Ethernet Network Start-Up
The IP address is conveniently assigned using the serial programming cable
provided and the "WAGO Ethernet Settings" program. Connect your PC to the
node's configuration and programming interface. Install the "WAGO Ethernet
Settings" program. You will find it on the "Tools & Docs" CD as well as on
the WAGO website under Service Downloads Software. After starting, the
program will determine the current node settings.
