Quick Start
•
11
Starting up the Bluetooth® Modules
WAGO-I/O-SYSTEM 750
I/O Modules
8. Choose
Net Forming
in the navigation bar.
9. Choose the option
All
in the area
Search for accessible devices
and click
on the
[Search]
button to search the network for
Bluetooth
®
devices in the
environment. To limit the search results to WAGO devices of the 750 se-
ries, choose
WAGO 750
.
The MAC addresses of all found
Bluetooth
®
devices are displayed in the list
of devices within range (see Figure 5).
The MAC address of the slave itself is not displayed in this dialog.
Figure 5: Net forming
g064463e
10. Search in the list for the MAC address of the master that you wrote down
in 2.2 so that you can then connect this master to your slave.
Note
At this point, the master must be in the configuration mode (factory setting).
11. Mark the found MAC address of the master with a mouse click.
12. Click on the
[>>]
button to transfer the marked MAC address to the list of
real-time devices (or, alternatively, ad hoc devices) for this slave.
The MAC address of the master is entered in the first line (slot 1).
