18 Device Description
WAGO I/O SYSTEM 750 XTR
750-613/040-000 System Power Supply 24 VDC XTR
Manual
Version 1.3.0
3.2.2
Power Jumper Contacts/Field Supply
The power supply module 750-613/040-000 has 2 self-cleaning power jumper
contacts that transmit power for the field side. The contacts on the right side of
the power supply module are designed as spring contacts.
Figure 1: Power Jumper Contacts
Table 4: Legend for Figure “Power Jumper Contacts”
Contact
Type
Function
1
Spring contact
Potential feed-in (Uv) for field supply
2
Spring contact
Potential feed-in (0 V) for field supply
Do not exceed maximum values via power contacts!
The maximum current that can flow through the power jumper contacts is 10 A.
The power jumper contacts can be damaged and the permissible operating
temperature can be exceeded by higher current values.
When configuring the system, do not exceed the permissible maximum current
value. If there is a higher power requirement, you must use an additional supply
module to provide the field voltage.
