WAGO 750-585/040-000 Manual Download Page 18 | Manualshive

Page: 18 / 60

background image

18 Device Description

WAGO I/O SYSTEM 750 XTR

750-585/040-000 2AO 0-20mA Ex i XTR

Manual

Version 1.1.0

Pos: 18.11 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Anschlüsse/Leistungskontakte/Feldversorgung - Überschrift 3 @ 6\mod_1256294692864_21.docx @ 43664 @ 3 @ 1

3.2.2

Power Jumper Contacts/Field Supply

Pos: 18.12.1 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Vorsicht/Vorsicht: Verletzungsgefahr durch scharfkantige Messerkontakte! @ 6\mod_1256193279401_21.docx @ 43414 @ @ 1

Risk of injury due to sharp-edged blade contacts!

The blade contacts are sharp-edged. Handle the I/O module carefully to prevent

injury. Do not touch the blade contacts.

Pos: 18.12.2 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Anschlüsse/Leistungskontakte 2 LK (Messer/Feder) - Einleitung @ 15\mod_1371721641099_21.docx @ 123714 @ @ 1

The I/O module 750-585/040-000 has 2 self-cleaning power jumper contacts that

supply and transmit power for the field side. The contacts on the left side of the

I/O module are designed as blade contacts and those on the right side as spring

contacts.

Pos: 18.12.3 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Anschlüsse/Leistungskontakte 2 LK (Messer/Feder) - Abbildung, doppelte Breite, Ex i @ 30\mod_1508428592212_21.docx @ 467258 @ @ 1

Figure 3: Power Jumper Contacts

Pos: 18.12.4 /Serie 750 (WAGO I/O SYSTEM)/Gerätebeschreibung (alte Struktur)/Anschlüsse/Leistungskontakte 2 LK (Messer/Feder) - Legende @ 15\mod_1371721352500_21.docx @ 123710 @ @ 1

Table 4: Legend for Figure “Power Jumper Contacts”

Contact

Type

Function

1

Spring contact Potential transmission (U

v

) for field supply

2

Spring contact Potential transmission (0 V) for field supply

3

Blade contact Potential feed-in (0 V) for field supply

4

Blade contact Potential feed-in (U

v

) for field supply

Pos: 18.12.5 /Serie 750 (WAGO I/O SYSTEM)/Wichtige Erläuterungen (alte Struktur)/Sicherheits- und sonstige Hinweise/Achtung/Achtung: Maximaler Strom Ex i Einspeisung 750-0606/040-000 XTR @ 28\mod_1486128985806_21.docx @ 405244 @ @ 1

Do not exceed maximum current via power contacts!

The maximum current available from the “Power Supply 24 VDC Diagn for Ex i

XTR Modules” 750-606/040-000 is 1 A.

When configuring the system, ensure that this current is not exceeded.

If exceeded, an additional 750-606/040-000 must be used.

Pos: 18.13 /Dokumentation allgemein/Gliederungselemente/---Seitenwechsel--- @ 3\mod_1221108045078_0.docx @ 21810 @ @ 1

«
...
16
17
18
19
20
...
»

Summary of Contents for 750-585/040-000





























































Reviews:

No comments

Related manuals for 750-585/040-000

Brand: zipwake Pages: 12

Brand: Watts Pages: 2

Brand: jbc Pages: 12

Brand: Dantherm Pages: 96

Brand: Gardena Pages: 17

Brand: SAFI Pages: 18

Brand: Badger Meter Pages: 2

Brand: Badger Meter Pages: 48

BadgerTouch HREBT

Brand: Badger Meter Pages: 12

Brand: Badger Meter Pages: 16

Brand: Zeagle Pages: 37

Brand: Parker Pages: 30

Compax3M Series

Brand: Parker Pages: 52

Brand: Parker Pages: 337

Brand: Uniden Pages: 28

Brand: UniFocus Pages: 23

Brand: UniFocus Pages: 6

Brand: Watts Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands