750-560 [2 AO 0-10V DC 10Bit 10mA 24V] • 11
View
WAGO-I/O-SYSTEM 750
I/O Modules
2 I/O Modules
2.1 Analog Output Modules
2.1.1 750-560 [2 AO 0-10V DC 10Bit 10mA 24V]
2-Channel Analog Output Module 0-10 V, 10 Bit, 10 mA
2.1.1.1 View
A1 A2
S S
13 14
C
D
B
A
750-560
M M
AO 2
Power jumper
contacts
Data contacts
24 V AC/DC
Function AO 1
AO 1
0 V
Shield
(screen)
Function AO 2
Error AO 1
Error AO 2
Shield
(screen)
Fig. 2.1.1-1: View
g056000e
2.1.1.2 Description
The analog output module 750-560 creates a standardized signal of 0-10 V.
The module has two short circuit protected output channels and enables, for
example, the direct wiring of two 3-conductor actuators to the connections
AO 1, AC/DC 24 V and 0 V or AO 2, AC/DC 24 V and 0 V. The signals are
transmitted via AO 1 and AO 2.
The channels have a common ground and a common shield (screen) (S). The
shield (screen) is directly connected to the DIN rail. A capacitive connection
is made automatically when snapped onto the DIN rail.
The input signal is electrically isolated and will be transmitted with a
resolution of 10 bits.
The operational readiness and the trouble-free internal data bus
communication of the channels are indicated via a green function LED.
In addition, a red error LED will show if there are any overload
15 mA or a
short circuit to ground in either channel.
