38 Mounting
WAGO-I/O-SYSTEM 750 XTR
750-537/040-000 8DO 24 VDC 0.5A Diagn XTR
Manual
Version 1.1.1
2.
Press the I/O module into the assembly until the I/O module snaps into the
carrier rail.
Figure 8: Snap the I/O Module into Place (Example)
With the I/O module snapped in place, the electrical connections for the data
contacts and power jumper contacts (if any) to the fieldbus coupler/controller or
to the previous or possibly subsequent I/O module are established.
5.2.2
Removing the I/O Module
1.
Remove the I/O module from the assembly by pulling the release tab.
