WAGO 750-469, Manual

Page: 57 / 62

WAGO-I/O-SYSTEM 750 Appendix 57
750-469 2AI Thermocouple
Manual
Version 1.1.0
Table 38: Specific Module/Channel parameters for 75x-469/003-000
Parameter Value WAGO
I/O- CHECK
GSD file
PB-DP PN-IO
deactivated
Wire break detection activated
*)
  
deactivated
Number format Twos complement
*)
  
Sign magnitude
PI diagnostics activated
  
deactivated
*)
Check lower
measurement
range limit
activated
*)
  
deactivated
Watchdog activated
*)
  
deactivated
User scaling activated
  
deactivated
*)
Offset 0x0000 (0)
*)

–

Gain 0x0100 (256)
*)

–

Vendor scaling activated
*)
  
deactivated
*)
Default setting
8.1.2.2 PROFIBUS DP Fieldbus Couplers/Controllers
750-333(/0xx-000), 750-833(/0xx-000)
The aforementioned fieldbus couplers/controllers allow module-specific
parameterization of behavior at diagnosis.
Table 39: General Module/Channel parameters
Parameter Value Explanation
Diagnosis
Channel x (x = 0…1)
The fieldbus coupler/controller signals a
diagnosis if the I/O module reports the events:
• External fault
• Measuring range underflow
• Wire break
0 (disabled)
*)
Diagnostics reported by the I/O module do not
lead to the signaling of a diagnosis by the
fieldbus coupler/controller.
1 (enabled) Diagnostics reported by the I/O module lead to
the signaling of a diagnosis by the fieldbus
coupler/controller.
*)
Default setting