manualshive.com logo in svg

WAGO 750-375, Manual

The WAGO 750-375 is a versatile and reliable PLC controller offering advanced automation capabilities. You can easily optimize your system using this compact device. Take advantage of its innovative features by downloading the free user manual from our website for comprehensive instructions and guidance on maximizing its potential.

Share
Download
background image

132  Fieldbus Communication 

WAGO-I/O-SYSTEM 750 

 

 

750-375 PROFINET IO advanced Fieldbus Coupler 

 

Manual 

 

Version 1.1.0  

A high standard of quality is ensured through inspections conforming to standards 
carried out within the PROFINET network and the certification of PROFINET 
devices. 

 

 

 

More information on PROFIBUS and PROFINET! 

Much more information on PROFIBUS and PROFINET such as technical 
descriptions and guidelines is available on the web site of the "PROFIBUS & 
PROFINET International (PI)" umbrella organization at: www.profibus.com. 

 

11.2.2 

Cabling 

A network for PROFINET IO is based on fast ETHERNET transmission at 100 
Mbit/s over cooper lines or fiber optic cables in star, tree, line or ring topology. 

If PROFINET fieldbus nodes have integrated switches, a network for PROFINET 
IO can be set up in a linear structure. 

If the connection between two field devices by integrated switches in a line 
(similar to PROFIBUS) is interrupted, the field devices located after the 
interruption are no longer accessible. To ensure the high availability of nodes in 
an automation system, redundant communication paths should be considered 
during system planning. 

 

 

 

More information on PROFINET cabling! 

A description of PROFINET cabling is available in the "PROFINET Installation 
Guide". The guide is available for download free of charge on the PROFIBUS 
user organization web site: www.profibus.com. 

 

11.2.3 

PROFINET IO Device Classes 

With PROFINET IO, process data is exchanged based on the provider/consumer 
model. The provider gives the process data to a consumer for processing (PLC 
with an application program or IO controller). The same applies in the opposite 
direction (output data of the IO controller to the IO device). 

The following device classes are defined for better structuring of field devices in 
PROFINET IO: 

•

  IO Supervisor 

•

  IO controller 

•

  IO Device 

Summary of Contents for 750-375

































































































































































































































Reviews:

No comments

Related manuals for 750-375

D-Link AirPlus G DWL-G510 Quick Installaion Manual preview
AirPlus G DWL-G510
Brand: D-Link Pages: 12
Movincool Office Pro 24 Installation Manual preview
Office Pro 24
Brand: Movincool Pages: 2
Rocstor Y10A218-B1 User Manual preview
Y10A218-B1
Brand: Rocstor Pages: 2
National Instruments NI 5762 User Manual And Specifications preview
NI 5762
Brand: National Instruments Pages: 27
Diamond Multimedia VC500MAC User Manual preview
VC500MAC
Brand: Diamond Multimedia Pages: 14
National Instruments SCXI 1346 Installation Manual preview
SCXI 1346
Brand: National Instruments Pages: 19
Devolo dLAN 200 AVpro Manual preview
dLAN 200 AVpro
Brand: Devolo Pages: 22
l-com ARK-2404U-3 User Manual preview
ARK-2404U-3
Brand: l-com Pages: 34
NetComm NP745n Technical Specifications preview
NP745n
Brand: NetComm Pages: 1
Dolphin PXH840 User Manual preview
PXH840
Brand: Dolphin Pages: 17
Rocom Doormaster 4 Quick Manual preview
Doormaster 4
Brand: Rocom Pages: 2
MSI US60G Quick Installation Manual preview
US60G
Brand: MSI Pages: 190
Crown CM-700 Brochure preview
CM-700
Brand: Crown Pages: 6
Abocom WUG2700 User Manual preview
WUG2700
Brand: Abocom Pages: 43
Sony KDL-32EX308 - Bravia Ex Series Lcd Television Specifications preview
KDL-32EX308 - Bravia Ex Series Lcd Television
Brand: Sony Pages: 2
Sony KDL-32EX308 - Bravia Ex Series Lcd Television User Manual preview
KDL-32EX308 - Bravia Ex Series Lcd Television
Brand: Sony Pages: 7
OBDLink MX Bluetooth Quick Start Manual preview
MX Bluetooth
Brand: OBDLink Pages: 12
MELAG MELAnet box Operating Manual preview
MELAnet box
Brand: MELAG Pages: 26

Brands by name

Popular brands

Load more brands