WAGO 2DI 60V DC 3ms XTR Manual Download Page 2

Page: 2 / 52

WAGO-I/O-SYSTEM 750 XTR

750-429/040-001 2DI 60V DC 3ms XTR

Manual

Version 1.2.0

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax:

+49 (0) 571/8 87 – 1 69

E-Mail:

[email protected]

Web:

www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 4 45 55

Fax:

+49 (0) 571/8 87 – 84 45 55

E-Mail:

[email protected]

Every conceivable measure has been taken to ensure the accuracy and

completeness of this documentation. However, as errors can never be fully

excluded, we always appreciate any information or suggestions for improving the

documentation.

E-Mail:

[email protected]

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally protected by trademark or patent.

WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH.

Summary of Contents for 2DI 60V DC 3ms XTR





















































Search results

Summary of Contents for 2DI 60V DC 3ms XTR

Reviews:

Related manuals for 2DI 60V DC 3ms XTR

Brands by name

Popular brands

WAGO 2DI 60V DC 3ms XTR, Manual

Search results

Summary of Contents for 2DI 60V DC 3ms XTR

Reviews:

Related manuals for 2DI 60V DC 3ms XTR

Brands by name

Popular brands