WAGO 2789-9023, Manual

Page: 57 / 94

2789-9023 Configuration
Product manual | Version: 1.0.0 57
EtherNet/IP Communication Module
Figure 18: Module Settings > Parameter Management
• Parameter Export : module and device parameter settings can be exported
• Parameter Import : module and device parameters can be imported
Switch Settings
Figure 19: Module Settings > Switch settings
• Enable Autonegotiation: Autonegotiation allows the UTP (Unshielded Twisted Pair)
link partners to select the best common operating mode in accordance with Clause 28
of the IEEE 802.3u specification. With autonegotiation, the link partners share their ca-
pabilities with each other over the link.
• Force 100 Mbits: forces connection via 100 Mbit
• Force Full Duplex: forces connection using full duplex
• Enable Broadcast Storm Protection: This option can be used to protect the switch
system from receiving too many broadcast packets. Since the broadcast packets are
forwarded to all ports except the source port, this can tie up an excessive number of
switch resources (bandwidth and available space in the send queues). The module can
optionally take multicast packets into account for storm control.
See also
2
MQTT [
}
41]
2 User Certificates [ } 67]
2 User Certificates [ } 67]
2
User Certificates [
}
67]
9.1.4 Module Information
General
This displays all the module information and indicates the status of the connection to the
lower-level device: