WAGO 2789-9023, Manual

Page: 55 / 94

2789-9023 Configuration
Product manual | Version: 1.0.0 55
EtherNet/IP Communication Module
MQTT
You can change the MQTT settings here; see
8
MQTT [
}
41] .
Figure 15: Module Settings > MQTT
• ID : client ID used for connecting to the broker; can only be used once if multiple clients
are used
• User/Password : If the broker requires authentication with a username and password,
these can be configured here
• Subscribe topic : topic used by the communication module to receive messages from
the broker
• Publish topic : topic for which the communication module will send messages to the
broker
• Publish interval : interval at which the communication module sends the messages
• Keep Alive : time interval for checking the availability of the subcribers
• IP-Address : IP address of the broker Certificate Upload for loading your MQTT certifi-
cates; see
8
User Certificates [
}
67] .
Note
Set Date / Time before certificate upload!
Before a certificate is uploaded, the settings for Date / Time must be set under [Module
Settings > System] .
EtherNet/IP
Figure 16: Module Settings > EtherNet/IP