WAGO 2787-2147, Manual

Page: 26 / 68

2787-2147 Properties
26 Product manual | Version: 1.0.0
Power Supply Pro 2
Table 33: Standards: EMC – Immunity to Interference
Standard Title
EN 61000-4-6 Part 4-6: Testing and measurement techniques – Immunity to conducted dis-
turbances, induced by radio-frequency fields
EN 61000-4-8 Part 4-8: Testing and measurement techniques – Power frequency magnetic
field immunity test
EN 61000-4-11 Part 4-11: Testing and measurement techniques – Voltage dips, short inter-
ruptions and voltage variations immunity tests
Table 34: Standards: EMC – Emission of Interference
Standard Title
EN 61204-3 Low-Voltage Switch Mode Power Supplies – Part 3: Electromagnetic Com-
patibility (EMC)
The following tests have been performed in accordance with the EMC standards listed:
Table 35: Standards: EMC – Immunity to Interference (Tests Performed)
Standard Title Test Value Category
EN 61000-4-2 Part 4-2: Testing and measurement
techniques – Electrostatic discharge
immunity test Contact discharge 4 kV B
Air discharge 2 kV/4 kV/8 kV B
EN 61000-4-3 Part 4-3: Testing and measurement
techniques – Radiated, radio-fre-
quency, electromagnetic field immu-
nity test 80 MHz … 1.0 GHz
(1 kHz AM 80 %) 10 V/m A
900 ± 5 MHz
(200 Hz PM 50 %) 10 V/m A
EN 61000-4-4 Part 4-4: Testing and measurement
techniques – Electrical fast transient/
burst immunity test AC input 2 kV, 5 kHz, 5 min. B
DC output 2 kV, 5 kHz, 5 min. B
DC OK/
digital input/
digital output 1 kV, 5 kHz, 5 min. B
Communication 1 kV, 5 kHz, 5 min. B
EN 61000-4-5 Part 4-5: Testing and measurement
techniques – Surge immunity test L → N 1 kV B
L → PE
N → PE 2 kV B
L+ → L− 0.5 kV B
EN 61000-4-6 Part 4-6: Testing and measurement
techniques – Immunity to conducted
disturbances, induced by radio-fre-
quency fields AC input 0.15 … 80 MHz:
10 V A
DC output 0.15 … 80 MHz:
10 V A
DC OK/
digital input/
digital output 0.15 … 80 MHz:
10 V A
Communication 0.15 … 80 MHz:
10 V A
EN 61000-4-8 Part 4-8: Testing and measurement
techniques – Power frequency mag-
netic field immunity test 50/60 Hz 30 A/m A
EN 61000-4-11 Part 4-11: Testing and measurement
techniques – Voltage dips, short in-
terruptions and voltage variations im-
munity tests
40 % of 100 VAC (50
… 60 Hz) 5 cycles C
70 % of 100 VAC (50
… 60 Hz) 0.5 cycles B
0 % of 100 VAC (50
… 60 Hz) 250/300 cycles C