WAGO 2787-2144, Product Manual

Page: 37 / 68

2787-2144 Configuration
Product manual | Version: 1.0.0 37
Power Supply Pro 2
9 Configuration
9.1 Requirements
9.1.1 System Requirements
The following system requirements must be met for the WAGO Interface Configuration
software to be installed:
Minimum System Requirements
Table 43: Minimum System Requirements
Components Requirements
Operating system • Windows 7 (32- and 64-bit)
• Windows 8 (32- and 64-bit)
• Windows 8.1 (32- and 64-bit)
• Windows 10 (32- and 64-bit)
Memory 2 GB
Free hard disk space 150 MB
Processor 1 GHz or higher, 32-bit (x86) or 64-bit (x64)
Screen resolution 800 × 600 pixels
Recommended System Requirements
Table 44: Recommended System Requirements
Components Requirements
Operating system Windows 10 (64-bit)
Memory 8 GB
Free hard disk space 250 MB
Processor 1 GHz or higher, 64-bit (x64)
Screen resolution 1920 × 1080 pixels
9.1.2 Install WAGO Interface Configuration Software
1. Open the
ü
WAGO website .
2. Download the WAGO Interface Configuration software G2 .
3. Start the installation process by double-clicking the installation file. This requires ad-
ministrator rights.
4. Choose whether to create a desktop icon and whether you want to launch the soft-
ware immediately.
5. Click Finish to complete installation.
9.1.3 Configure Product
Configuring the product requires the WAGO Interface Configuration software to be in-
stalled (see also section
8 Install WAGO Interface Configuration Software [ } 37] ).
You can use the software to configure the product either online or offline (see also sec-
tion
8 Dialog: Settings [ } 42] ).