37
OPERATING MANUAL
VERSION 01/2013
ORDER NUMBER DOC 2333538
6.5
COMMISSIONING
Before carrying out any work, the following points must be observed in accordance
with the operating instructions:
- Observe all safety regulations in accordance with Chapter 4.
- Carry out commissioning properly.
6.5.1
SAFETY INSTRUCTIONS
High pressure spray jet!
Danger to life from injecting paint or solvent.
Never reach into the spray jet.
Never point the spray gun at people.
Consult a doctor immediately in the event of skin injuries caused
by paint or solvent. Inform the doctor about the paint or solvent
used.
Never seal defective high pressure parts, instead relieve the
pressure from them and replace them.
WARNING
Toxic and/or fl ammable vapor mixtures!
Risk of poisoning and burns.
Operate the device in a spray booth approved for the working
materials.
- or -
Operate the device on an appropriate spraying wall with the
ventilation (extraction) switched on.
Observe national and local regulations for the outgoing air
speed.
WARNING
Gas mixtures can explode if there is an incompletely filled
pump!
Danger to life from flying parts.
Ensure that the pump and suction system are always completely
filled with fl ushing agent or working medium.
Do not spray the device empty after cleaning.
WARNING
