WAGNER W 560, Operating Instruction

Page: 35 / 36

GB
29
W 560
Accessories (not included in the delivery)
Perfect Spray spray attachment incl. 800 ml. conainer
For a rapid paint change. For medium- and large-scale objects and
furniture.
2314 492
Small-scale spray attachment incl. 250 ml container
For filigree objects, detailed and creative work. 2314 500
Perfect Spray spray attachment incl. 1400 ml container
Rapid working at larger objects such as timber houses, garage doors, etc. 2314 494
Detail / Radiator spray attachment incl. 600 ml container
For inaccessible places, such as radiators, cupboard corners, recesses etc. 2314 496
Further information about the WAGNER range of products for renovating is
available under www.wagner-group.com
Correction of Malfunctions
Problem Cause Remedy
No coating material
emerges from the
nozzle
Nozzle clogged
Feed tube clogged
Material volume setting turned too far
to the left (-)
Feed tube loose
No pressure build-up in container
Clean
Clean
Turn to the right (+)
Insert
Tighten container
Coating material drips
from the nozzle
Nozzle loose
Nozzle worn
Nozzle seal worn
Coating material assembly at air cap,
nozzle or needle
Tighten
Change
Change
Clean
Atomisation too coarse Viscosity of coating material too high
Material volume too large
Material volume adjusting screw turned
too far to the right (+)
Nozzle contaminated
Air filter heavily soiled
Too little pressure build-up in container
Thin
Turn material volume adjusting
screw to the left (-)
Clean
Change
Tighten container
Spray jet pulsates Coating material in container running
out
Air filter heavily soiled
Refill
Change
Coating material causes
"paint tears"
Too much coating material applied. Turn material volume adjusting
screw to the left (-)
Too much fog of
coating material
(Overspray)
Distance to the object too large
Too much coating material applied
Reduce distance
Turn material volume adjusting
screw to the left (-)
Paint in the ventilating
hose
Diaphragm soiled
Diaphragm defective
Clean the diaphragm
Replace the diaphragm