background image

11

W 350

AUS

18. Environmental protection

The device and all accessories and packaging have to be recycled in an 

environmentally friendly manner. Do not dispose of the appliance with 

household waste. Support environmental protection by taking the appliance 

to a local collection point or obtain information from a specialist retailer. 

Leftover paint and solvents may not be emptied into drains, the sewage system 

or disposed of as household rubbish. It has to be disposed of separately as 

special waste. Please pay special attention to the instructions on the product 

packaging.

19. Important Note regarding Product Liability!

According to an EU directive, the manufacturer is only liable without limitation for faults 

in the product if all parts come from the manufacturer or have been approved by the 

manufacturer and have been mounted to the device and are operated properly. If third-

party accessories or spare parts are used, the manufacturer is exonerated wholly or partly 

from his/her liability if use of the third-party accessories or spare parts have caused a 

defect in the product.

3+1 years guarantee

The guarantee runs for three years, counting from the date of sale (sales slip). The 

guarantee is extended by a further 12 months if the device is registered online within 

4 weeks of the purchase at www.wagner-group.com/3plus1. Registration is only 

possible if the buyer is in agreement with the data being stored that is entered during 

registration. The guarantee covers and is restricted to free-of-charge rectification 

of faults which are demonstrably attributable to the use of faulty materials in 

manufacture, or assembly errors; or free-of-charge replacement of the defective parts. 

The guarantee does not cover incorrect use or commissioning or fitting or repair work 

which is not stated in our operating instructions. Wearing parts are also excluded from 

the guarantee. The guarantee excludes commercial use. We expressly reserve the right 

to fulfil the guarantee. The guarantee expires if the tool is opened up by persons other 

than WAGNER service personnel. Transport damage, maintenance work and loss and 

damage due to faulty maintenance work are not covered by the guarantee. Under 

any guarantee claim, there must be proof of purchase of the tool through submission 

of the original receipt. Wherever legally possible, we exclude all liability for injury, 

damage or consequential loss, especially if the tool has been used for a purpose other 

than that stated in the operating instructions, commissioned or repaired other than 

in accordance with our operating instructions or if repairs are performed by someone 

who is unqualified. We reserve the right to perform any repairs in excess of those 

stated in our operating instructions. In case of guarantee or repair, please refer to your 

point of sale.

Summary of Contents for W 350





















Reviews: