TROUBLE SHOOTING
No picture or sound
a) Check the power on/off switches on the Transmitter, Receiver and TV
b) Make sure the power plug and signal cable are pushed all the way in.
c) Check if the channel of transmitter & receiver are set to the same channel.
d) Make sure that all cables are connected as per the user guide
e) Check if there is any discontinuity inside the cable.
f) If you use S-Video Connection, your TV set must be set to “S-Video” mode
Interference & noise
a) Adjust receiver antenna direction for optimal performance.
(see Pictures 5, 6)
b) Adjust transmitter antenna direction for optimal performance.
(see Pictures 5, 6 )
c) Check if the supplied voltage matches the adapter specification
(The power output has to be 12 VDC, 300mA centre positive)
d) Select a different microwave channel by sliding the channel button on both
transmitter and receiver.
(see Pictures 4 )
e) You can also vary the transmit / receiver position for optimal performance.
f) If the distance between receiver and transmitter is less than 10 M do not open
the round antenna as the signal could be too strong to obtain a sharp picture.
g) If using a microwave oven, turn it off.
h) Remove microwave oven or clear unnecessary obstructions from the path
between transmitter and receiver.
5