GB
20
W1500 P
Work in the garden
•
Steam can be used to disinfect soil in flower beds or greenhouses. First loosen the soil
to attain a porous surface. Hold the steam plate (12) over each section for about 2 to 2
1/2 minutes to ensure that the steam has penetrated the surface.
9. Refilling the water tank
•
Switch off the steam cleaner at the on/off switch and
disconnect from the mains.
•
Let the steam cleaner cool down for about 5 minutes and
release the pressure by depressing the trigger (Fig. 14).
i
Please note that the steam cap (6) may not be removed while the device is
still under pressure for safety reasons.
•
Wait until there is no more steam coming out and then
turn the steam cap (6) in an anticlockwise direction to
remove it.
•
Fill the steam cleaner with the help of the funnel (Fig. 15, 3)
and measurement jug (2) with max. 1200 ml water.
•
Put the steam cap back on (6) and screw it shut tightly.
•
Switch the steam cleaner back on.
•
As soon as the steam display (orange) goes off, you can
continue your work.
10. Cleaning and maintenance
ATTENTION! Carry out cleaning and maintenance only when the steam
cleaner is switched off and all individual parts have cooled down!
i
To ensure that the steam cleaner functions properly over a longer period, rinse
the water tank once a month to remove any lime scale. When you do this, we
recommend using a vinegar solution or a normal descaler. Depending on how
hard the water is, you might need to descale more often. Using distilled water
is recommended.
•
Clean the steam cleaner and accessories with a slightly damp cloth.
•
Never use a cleaning product or detergent.
•
If the steam cleaner calcifies, pour a vinegar solution or a normal descaler into the water
tank and leave it take effect for about 2-3 hours. Please observe also the instructions for
using the descaler provided by the manufacturer.
•
The steam cleaner does not consists of any components that should be repaired by
the customer. All repairs must be carried out by Wagner Customer Services.
D
3
2
