5
StandardSpray
GB
COATING MATERIAL
PROCESSING
COMMENTS
Clear varnishes, synthetic
enamels, coloured paints,
alkyd resin varnishes
observe manufacturer’s
instructions
Primers, radiator paints,
hammer effect enamels
observe manufacturer’s
instructions
Anti-rust paints, special-
effect paints
observe manufacturer’s
instructions
Multicolor paints, textured
paints
observe manufacturer’s
instructions
WallSpray spray
attachment (white)
recommended
Assembly
For assembly, insert the spray attachment into the gun handle so that the two
arrows point at each other. Turn the gun handle 90° in the arrow direction until
it audibly engages. (Fig. 1)
To remove the spray attachment, push the catch (Fig. 1, A) beneath the trigger down and
turn the spray attachment by 90°.
For further information on setting the spray pattern and the correct spraying
technique refer to the instructions of the basic device.
Spare Parts (Fig. 2)
You cannot combine different-coloured parts of other attachments.
POS.
ORDER NO.
DESIGNATION
1
2321 879
StandardSpray spray attachment (yellow) complete
2
2314 594
Spray jet width adjusting lever (shaping air)
3
2314 591
Spray jet level adjusting ring (vertical/horizontal)
4
2332 577
Union nut (yellow)
5
2317 807
Air cap
6
2314 585
Air screen
7
2317 423
Nozzle (S 4.1)
Summary of Contents for StandardSpray
Page 2: ...StandardSpray 1 2 3 5 6 7 8 9 10 11 12 13 15 14 1 2 3 A 4...
Page 30: ...28 StandardSpray...
Page 31: ...29 StandardSpray...
