WAGNER PROTEC GM 1-350 Operating Manual Download Page 18 | Manualshive

Page: 18 / 32

WAGNER PROTEC GM 1-350 Operating Manual Download Page 18

18

GM 1-350/530

B_5049

OPERATING MANUAL

VERSION 02/2015

ORDER NUMBER DOC2349369

7.3.3

CHANGING THE AIRLESS NOZZLE

Defective Airless nozzle!

Insuffi

cient paint application quality

Do not use sharp-edged objects on the carbide on the Airless nozzle.

Nozzles can be easily removed and replaced without
having to take apart the Airless spray gun.

1. Relieve the pressure on the spray gun and product

pressure generator in accordance with Chapter 7.3.2.

2. Secure the spray gun with the locking device.

3. Remove the nozzle from the opening at the nozzle

holder. Attention: when removing the reversing nozzle,
always aim the spray gun at the fl oor, as product can still
come out due to product being trapped between the
reversing nozzle and the valve seat.

4. Insert the new nozzle into the opening at the nozzle

holder. The tip on the reversing nozzle has to point
forward in the direction of spray.

NOTICE

For disassembly and assembly of Airless nozzles, see Chapter 7.3.3.
The Airless nozzle can be placed into a cleaning solution recommended by the paint
manufacturer.

7.3.4

CLEANING THE AIRLESS NOZZLE

«
...
16
17
18
19
20
...
»

Summary of Contents for PROTEC GM 1-350

































Reviews:

No comments