manualshive.com logo in svg

WAGNER Prima Sprint Airfluid, Translation Of The Original Operating Manual

Share
Download
WAGNER Prima Sprint Airfluid Translation Of The Original Operating Manual Download Page 76

76

Prima Sprint

.

1

2

3

5

P_00591

P_00933

OPERATING MANUAL

VERSION 07/2009

ORDER NUMBER DOC 2305835

7.2.6 

MOUNTING THE C4-VL 150/300/500 S GUN EXTENSION

Hint:

The gun must be thoroughly cleaned before installing the gun extension.
We recommend to use a new spray gun.

Procedure:

SIHI_05041_ENG

DANGER

Exploding dust/air mixture!

Danger to life from flying parts and burns.

œ

The inside coating of hollow bodies and/or in narrow spaces is
forbidden in accordance with BGI 764.

1.  Unscrew the outer nut 1 from the spray gun housing 5.
2.  Pull the fan spray nozzle 2 off the electrode holder 3.
3.  Carefully pull the electrode holder 3 out of the spray gun housing 5.

Hint:

Do not damage the electrode holder 3, when pulling out.

4.  Remove powder residue from the parts removed and from the spray gun.

Summary of Contents for Prima Sprint Airfluid

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands