background image

 

14 

D

Wichtiger Hinweis zur Produkthaftung

Aufgrund einer ab 01.01.1990 gültigen EU-Verordnung haftet der 

Hersteller nur dann für sein Produkt, wenn alle Teile vom Hersteller 

stammen oder von diesem freigegeben wurden,
bzw. die Geräte sachgemäß montiert und betrieben werden.
Bei Verwendung von fremdem Zubehör und Ersatzteilen kann die 

Haftung ganz oder teilweise entfallen; in extremen Fällen kann von den 

zuständigen Behörden (Berufsgenossenschaft und Gewerbeaufsichtsamt) 

der Gebrauch des gesamten Gerätes untersagt werden.
Mit Original WAGNER Zubehör und Ersatzteilen haben Sie die Gewähr, 
dass alle Sicherheitsvorschriften erfüllt sind.

Garantieerklärung

Die Garantie beträgt bei privater Nutzung 24 Monate, bei kommerzieller 

Nutzung 12 Monate. Übersteigt die mit dem Gerät verarbeitete 

Farbmenge 1000 Liter, wird dies einer kommerziellen Nutzung 

gleichgestellt. 

Für dieses Gerät leisten wir Werksgarantie in folgendem Umfang:

Alle diejenigen Teile werden unentgeltlich nach unserer Wahl 

ausgebessert oder neu geliefert, die sich innerhalb der Garantiezeit seit 

Übergabe an den Käufer infolge eines vor dieser Übergabe liegenden 

Umstandes- insbesondere wegen fehlerhafter Bauart, schlechter 

Baustoffe oder mangelhafter Ausführung – als unbrauchbar oder in ihrer 

Brauchbarkeit erheblich beeinträchtigt erweisen.
Wir übernehmen keine Garantie für Schäden die durch folgende Gründe 

mit verursacht worden sind:

Ungeeignete oder unsachgemäße Verwendung, fehlerhafte Montage, 

bzw. Inbetriebsetzung durch den Käufer oder durch Dritte, natürliche 

Abnutzung - Verschleißteile fallen nicht unter die WAGNER Garantie, 

fehlerhafte Behandlung insbesondere mangelnde Reinigung oder 

Wartung, ungeeignete Beschichtungsstoffe, Austauschwerkstoffe 

und chemische, elektrochemische oder elektrische Einflüsse, sofern 

die Schäden nicht auf ein Verschulden von uns zurückzuführen sind. 

Schmirgelnde Beschichtungsstoffe, wie beispielsweise Dispersionen, 

Glasuren, Quarzgrund, abrasive Materialien o. ä. verringern die 

Lebensdauer von Ventilen, Packungen, Spritzpistole, Düsen, Zylinder, 

Kolben, Filter, Schläuche, Dichtungen, etc.. Hierauf zurückzuführende 

Verschleißerscheinungen sind durch diese Garantie nicht gedeckt. Das 

Gerät ist für den Einsatz im Schichtbetrieb als auch für die Vermietung, 

den Verleih nicht konzipiert – diese Verwendungen sind von der Garantie 

ausgeschlossen.
Der Austausch eines Teils verlängert nicht die Garantiezeit des Gerätes.
Das Gerät ist unverzüglich nach Empfang zu untersuchen. Offensichtliche 

Mängel sind bei Vermeidung des Verlustes der Mängelrechte innerhalb 

von 14 Tagen nach Empfang des Gerätes schriftlich mitzuteilen.
Wir behalten uns vor, die Garantie durch ein Vertragsunternehmen 

erfüllen zu lassen.
Reparaturen oder Instandsetzungsarbeiten, die weitergehen als in dieser 

Bedienungsanleitung angegeben, behalten wir uns im Werk vor. Wenden 

Sie sich im Garantie- oder Reparaturfall bitte an den Fachhändler, bei dem 

Sie das Gerät erworben haben.
Die Leistung der Garantie ist abhängig vom Nachweis durch Rechnung, 

Lieferschein bzw. Kaufbeleg.
Ergibt die Prüfung, dass kein Garantiefall vorliegt, so geht die Reparatur 

zu Lasten des Käufers.
Ansprüche gegenüber Wagner, basierend, bzw. verursacht durch 

einen 

Geräteausfall bzw. Mangel können nicht geltend gemacht werden.

Klargestellt wird, dass diese Garantieerklärung keine Einschränkung der 

gesetzlichen, bzw. der durch unsere allgemeinen Geschäftsbedingungen 

vertraglich vereinbarten Ansprüche darstellt.

J. Wagner GmbH

Änderungen und Irrtümer vorbehalten

GB

Important notes on product liability

As a result of an EC regulation being effective as from January 1, 1990, the 

manufacturer shall only be liable
for his product if all parts come from him or are released by him, and if the 

devices are properly mounted and operated.
If the user applies outside accessories and spare parts, the manufacturer´s 

liability can fully or partially be inapplicable; in extreme cases usage of the 

entire device can be prohibited by the competent authorities (employer´s 

liability insurance association and factory inspectorate division).
Only the usage of original WAGNER accessories and spare parts 
guarantees that all safety regulations are observed.

Guarantee declaration

The guarantee period amounts to 24 months in case of private use, and 

to 12 months in case of commercial use. If the amount of paint processed 

with the unit exceeds 1,000 litres, this is considered to be commercial use. 

We give a works guarantee to the following extent for this unit:

All those parts that prove to be unserviceable or to be considerably 

impaired in their serviceability within the guarantee period since the 

point of handing over to the buyer due to a circumstance lying before this 

handing over – in particular due to faulty design, bad building materials 

or poor execution – are improved or supplied new as we choose without 

costs.
We do not accept any guarantee for damage that has been caused by the 

following reasons:

Unsuitable or incorrect usage, faulty mounting or starting-up by the 

buyer or by third parties, natural wear - wear parts are not covered by the 

WAGNER guarantee , faulty handling in particular inadequate cleaning 

or maintenance, unsuitable coating materials, substitute materials and 

chemical, electrochemical or electrical influences, in as far as damage 

is not due to our fault. Abrasive coating materials, such as dispersions, 

glazes, quartz undercoats, abrasive materials, etc. reduce the durability of 

valves, packings, spray guns, tips, cylinders, pistons, filters, hoses, seals, 

etc. Any resulting signs of wear are not covered by this guarantee. The 

unit is not conceived for use in shift work or for lending or leasing – these 

uses are excluded from the guarantee.
The replacement of a part does not extend the guarantee period of the 

unit.
The unit has to be examined immediately after receipt. Obvious faults are 

to be reported in writing within 14 days after receipt of the unit in order 

to avoid loss of the rights arising from faults.
We reserve the right to have the guarantee fulfilled by a contractual 

company.
Repairs going above and beyond those dealt with in these operating 

instructions are reserved for our factory. In case of a guarantee case or 

repair, please contact the specialist dealer from whom you purchased the 

unit.
Fulfilling of the guarantee depends on proof being provided by invoice 

and delivery note or proof of purchase.
If the check shows that the case is not a guarantee case, repairs are 

carried out at the expense of the buyer.
Claims against Wagner that are based on or caused by the failure or 

insufficiency of a unit cannot be asserted.
We make it clear that the guarantee declaration does not represent a 

limitation of the statutory rights or of the rights agreed contractually 

through our general terms of business.

J. Wagner GmbH

Not responsible for errors and changes

Summary of Contents for PP119





















Reviews: