21
EN
Power Steamer 915e
9 Refilling the water tank
•
Switch off the steam cleaner at the on/off switch and
disconnect from the mains.
•
Let the steam cleaner cool down for about 30 minutes and
release the pressure by depressing the trigger.
i
Please note that the steam cap (2) may not be removed while the device is
still under pressure for safety reasons.
• •
Wait until there is no more steam coming out and then turn the steam cap (2) in an
Wait until there is no more steam coming out and then turn the steam cap (2) in an
anticlockwise direction to remove it.
anticlockwise direction to remove it.
• •
Fill the steam cleaner with the help of the funnel (3) with max. 1200 ml water.
Fill the steam cleaner with the help of the funnel (3) with max. 1200 ml water.
• •
Put the steam cap back on (2) and screw it shut tightly.
Put the steam cap back on (2) and screw it shut tightly.
•
Switch the steam cleaner back on.
•
As soon as the steam display (orange) goes off, you can continue your work.
10 Cleaning and maintenance
10 Cleaning and maintenance
ATTENTION! Carry out cleaning and maintenance only when the steam
cleaner is switched off and all individual parts have cooled down!
i
To ensure that the steam cleaner functions properly over a longer period, rinse
the water tank once a month to remove any lime scale. When you do this, we
recommend using a vinegar solution or a normal descaler. Depending on how
hard the water is, you might need to descale more often. Using distilled water
is recommended.
• •
Clean the steam cleaner and accessories with a slightly damp cloth.
Clean the steam cleaner and accessories with a slightly damp cloth.
•
Never use a cleaning product or detergent.
•
Empty the steam cleaner completely. Never store the steam cleaner with liquid in the tank.
•
If the steam cleaner calcifies, pour a vinegar solution or a normal descaler into the water
tank and leave it take effect for about 2-3 hours. Please observe also the instructions for
using the descaler provided by the manufacturer.
•
The steam cleaner does not consists of any components that should be repaired by
the customer. All repairs must be carried out by Wagner Customer Services.
11 Correction of Malfunctions
11 Correction of Malfunctions
Problem
Problem
Remedy
Remedy
A.
Water is coming out
of the nozzle
•
The steam cleaner generates a lot of steam. This may
condense as water or water droplets in the steam hose and
can be expelled when used after a period of cooling. This is
normal and not a cause for concern. (see chapter 8)
D
