WAGNER Nespray Pro, Service Manual

Page: 18 / 51

18
Super Finish 33 PLUS/PRO • Nespray Pro
4.3
ADDITIONAL SPARE PARTS SF 33 PLUS/PRO (SERVICE ONLY)
ITEM
ORDER-NO* DESIGNATION
QUANTITY**
1 9990535 Protective cap 6
2 2359803 Cylinder head screw M12x60 6
3 9920204 Washer 13 6
4 2318934 Dust cover 1
5 2405098 Diaphragm SF-33 assy. 1
6 2367511 Insert 1
7 2368784 O-ring (46x2) 1
8 2337803 O-ring (21.95x1.78) 1
9 34357 Pressure spring 1
10 341311 Piston D25 1
11 9907079 Cylinder head screw M8x30 4
12 9920102 Washer 8.4 4
13 2384951 Pressure insert 1
14 2383771 Regulator assy. SF-33 1
15 10861 Pressure spring 1
16 10858 Clip 1
17 10859 Stop sleeve 1
18 2369490 Pressure control knob assy. 1
19 2385357 Label, pressure control valve 1
20 2405099 Pressure control valve SF-33 assy. 1
21 3051678 O-ring (9x3) 1
22 2396020 Seal (Cu) 1
23 2370116 Sleeve, rubber 1
24 2367512 Liner D25 *** 1
25 2368784 O-ring (39x3) 1
26 2401952 Seal 1
27 2374597 Cover 1
28 344323 Fitting M20x2 1
29 2390396
2390422
Paint head assy. SF-33 Plus (incl. item 28)
Paint head assy. SF-33 Pro (incl. item 28)
1
1
Service kits
2400487 Sealing-Set
(consisting of item 7, 8, 21, 23, 25)
2385009 Pressure insert assy.
(bestehend aus item 13, 22, 24, 25)
* Order number for 1 piece
** Quantity in the complete assembly
*** Turn to approx. 100 Nm, loosen and tighten to 90 Nm. Check piston mobility.
GB
To remove the pump, move
it to an upright position.
Open the oil lock screw to
release any excess pressure
that has built up in the hy-
draulic oil housing.