500-62201-001 Rev. M
Page 7 of 33
Turning on the L622
Readings Mode
Storing Readings
Operation
To turn on the L622, press the
STORE
button for one second. The display
will briefly show the Model, Version,
and Revision numbers.
The L622 will turn off after 1 minute of
inactivity. Inactivity means no change
in moisture readings or buttons
pressed.
The L622 takes continuous percent
moisture content (%MC) readings and
puts them on the display. When a
reading is below 5%, the first line
shows the current species and group
field label. The second line shows the
current reading and the active group
number. When a reading is above
5%, the first line becomes a bar graph
representing the current reading.
When storing a valid reading, the
second line will display the message
Storing along with the sample number.
When attempting to store an invalid
reading, the second line will display
message Too Low along with the last
sample number.
Display
WAGNER L622
V xx.xx Rxx.xx
Douglas Fir GRP .0
% 0
Storing 14 or
Too Low 13
STORE
To turn the meter on, press the
STORE
button for one second.
Press the
STORE
button to store the
current reading into the active group.
GROUP
Press the
GROUP
button to activate
the change group function.
MENU
Press the
MENU
button to activate the
main menu.
ARROWS
Refer to the Factory Default section.
