21
FinishControl 6500 TS
GB
clIck&PaInt system /technIcal data/ IntroductIon
4
the WAgner clIck&PAInt
SySteM
With the Wagner Click&Paint System, the front part of the gun
(spray attachment) can be replaced quickly and easily.
This enables a rapid material change without cleaning, and
ensures that the right tool is available for every material and
application.
The following spray attachments are available:
Spray attachment
Area of application
TempSpray (red)
Order No. 2321 878
Spray attachment with slot nozzle
and heated container (600 ml).
The raised temperature enables
highly viscose paints to be used.
FineSpray (brown)
Order No. 2321 877
Spray attachment with round nozzle
and 1000 ml stainless steel contain-
er. Ideal for low-viscosity paints and
glazes.
WallSpray (white)
Order No. 2321 880
Dispersion spray attachment with slit
nozzle and 1400 ml plastic container.
Designed for processing dispersions.
4.1
dISASSeMBly of the SPrAy gun
For assembly, insert the spray attachment into the gun handle
so that the two arrows point at each other. Turn the gun han-
dle 90° in the arrow direction until it audibly engages. (Fig. 3)
To remove the spray attachment, push the catch (Fig. 3, A)
beneath the trigger down and turn the spray attachment by
90°.
5
technIcAl dAtA
Voltage:
230 V~, 50 Hz
Power consumption:
1900 W
Atomizing output:
300 W
Container volume:
600 ml
Air hose:
5 m
Power cable:
4 m
Protection class:
I
Sound pressure level:*
Uncertainty K:
84 dB (A)
4 dB (A)
Sound pressure output:*
Uncertainty K:
97 dB (A)
4 dB (A)
Oscillation level:
Uncertainty K:
<2.5 m/s²
1.5 m/s²
Weight (motor-operated blower,
air hose and spray gun):
9 kg
* The acoustic emission value was ascertained in accordance
with EN 50144-2-7:2000
6
IntroductIon to SPrAyIng
uSIng the XvlP Procedure
XVLP (E
x
tra
v
olume
l
ow
P
ressure) is a low pressure spraying
technique, which works with a high volume of air and a low air
pressure. The greatest advantage of this spraying technique
is the low paint mist formation. This reduces the amount re-
quired to cover the object to a minimum.
As opposed to conventional application of coatings, this
method achieves a highly economical and perfect surface
quality and is, at the same time, environmentally friendly.
function description
The paint spraying system consists of a motor-operated tur-
bo-blower, which provides the spray gun with atomisation air
through an air hose.
In the spray gun, a part of the atomisation air is used to pres-
surise the container. This pressure causes the coating material
to be fed through the uptake pipe to the nozzle where it is
atomised by the rest of the atomisation air.
All settings necessary for operation (e.g. material volume) can
be conveniently made, directly on the gun.
Thanks to the heating station, which is integrated into the ba-
sic device, the paint can be heated up in the supplied Temp-
Spray spray attachment.
7
coAtIng MAterIAl
7.1 coAtIng MAterIAlS SuItABle for uSe
Solvent-based and water-soluble lacquer paints
Mordants, glazes, impregnations, oils, clear varnishes, syn-
thetic enamels, coloured paints, alkyd resin varnishes, prim-
ers, radiator paints, hammer effect enamels, anti-rust paints,
special-effect paints, textured paints
7.2 coAtIng MAterIAlS not SuItABle for uSe
Materials that contain highly abrasive components, facade
paint, caustic solutions and acidic coating substances.
Flammable materials.
