background image

25

Control Pro 250 M

GB

Accessories (not included in the delivery)

Description

Order No.

Nozzle 619 (for thick materials, e.g. interior wall paints. For coating larger surfaces) 

0517619

Filter, red (nozzle 311, 2 pack)

0418 711

Filter, white (nozzle 517/619, 2 pack)

0418 713

Gun extension (30 cm)

0517700

Oil (118 ml) 

2319722

Further information about the WAGNER range of products for renovating is available under www.wagner-group.com

Technical Data

Pump type

Piston pump

Power source

230 V

 ~ 

 50 Hz/ 240 V

 ~ 

 50 Hz

Power consumption

550 W

Fusing

Only connect to sockets protected with an FI fuse (16 A)

Protection class

I

Max. spray pressure

11 MPa (110 bar)

Max. delivery rate 

1.25 l/min

Sound pressure level 

*

81 dB (A)  Uncertainty K= 4 db

Sound pressure output 

*

94 dB (A)  Uncertainty K= 4 db

Oscillation level *

< 2,5 m/s

2   

Uncertainty K= 1.5 m/s

2

Max. temperature of coating substance

40°C

Hose length

9 m

Max. hose length

30 m

Product dimensions

approx. 46.5 x 32 x 38 cm

Weight

approx. 7.6 kg 

* Measured in accordance with EN 62841-1

Information about the oscillation level

The specified oscillation level has been measured according to a standard test procedure and can be used to compare against electric tools. 

The oscillation level is also for determining an initial assessment of the vibrational strain.

Attention! 

The vibration emission value can differ from the specified value when the electric tool is actually in use, depending on 

how the electric tool is being used. It is necessary to specify safety measures to protect the operating personnel. These measures are 

based on an estimated shutdown during the actual conditions of use (all parts of the operating cycle are taken into consideration 

here, for example periods when the electric tool is switched off, and, when it is switched on but running without any load).

Environmental protection

The device and all accessories and packaging have to be re-used in an environmentally friendly manner. Do 

not dispose of the appliance with household waste. Support environmental protection by taking the appliance 

to a local collection point or obtain information from a specialist retailer. 

Leftover paint and solvents may not be emptied into drains, the sewage system or disposed of as household rubbish. It has 

to be disposed of separately as special waste. Please pay special attention to the instructions on the product packaging.

Important Note regarding Product Liability!

Due to an EC ordinance in effect since 01.01.1990, the manufacturer is liable for his product only if all parts originate from or were 

approved by the manufacturer and the devices are assembled and operated correctly. The use of other accessories and spare parts 

can partially or completely invalidate the liability.

Summary of Contents for CONTROL PRO 250 M





















Reviews: