WAGNER Control Pro 150 Operating Instructions Manual Download Page 18

18

Control Pro 150

AUS

 

3+1 years guarantee

The guarantee runs for three years, counting from the date of sale (sales slip). The guarantee is extended by a further 12 months if 

the device is registered online within 4 weeks of the purchase at www.wagner-group.com/3plus1. Registration is only possible if 

the buyer is in agreement with the data being stored that is entered during registration. The guarantee covers and is restricted to 

free-of-charge rectification of faults which are demonstrably attributable to the use of faulty materials in manufacture, or assembly 

errors; or free-of-charge replacement of the defective parts. The guarantee does not cover incorrect use or commissioning or 

fitting or repair work which is not stated in our operating instructions. Wearing parts are also excluded from the guarantee. The 

guarantee excludes commercial use. We expressly reserve the right to fulfil the guarantee. The guarantee expires if the tool is 

opened up by persons other than WAGNER service personnel. Transport damage, maintenance work and loss and damage due to 

faulty maintenance work are not covered by the guarantee. Under any guarantee claim, there must be proof of purchase of the tool 

through submission of the original receipt. Wherever legally possible, we exclude all liability for injury, damage or consequential 

loss, especially if the tool has been used for a purpose other than that stated in the operating instructions, commissioned or 

repaired other than in accordance with our operating instructions or if repairs are performed by someone who is unqualified. 

We reserve the right to perform any repairs in excess of those stated in our operating instructions. In case of guarantee or repair, 

please refer to your point of sale.

Environmental protection

The device and all accessories and packaging have to be re-used in an environmentally friendly manner. Do 

not dispose of the appliance with household waste. Support environmental protection by taking the appliance 

to a local collection point or obtain information from a specialist retailer. 

 

 

 

 

Leftover paint and solvents may not be emptied into drains, the sewage system or disposed of as household rubbish. It has 

to be disposed of separately as special waste. Please pay special attention to the instructions on the product packaging.

Important Note regarding Product Liability!

According to an EU directive, the manufacturer is only liable without limitation for faults in the product if all parts come from the 

manufacturer or have been approved by the manufacturer and have been mounted to the device and are operated properly. If 

third-party accessories or spare parts are used, the manufacturer is exonerated wholly or partly from his/her liability if use of the 

third-party accessories or spare parts have caused a defect in the product.

Summary of Contents for Control Pro 150





















Reviews: