7
M
A (÷) symbol will appear on the left side
of the screen. This will indicate the hold
mode. To clear the screen, press the On/
Hold button again.
Material Sensitivity Range
There are three ways to use
the material sensitivity range
feature.
1. You can use the factory setting of
:50 for the moisture measurement
of many materials. No adjustment is
needed.
2. Before you scan a very dense material
such as concrete or cement, change the
material setting to 1:00. Remember
to reset the number to :50 when done
measuring this type of material.
To operate the material sensitivity range
feature, turn on the meter; when the
