WAGNER AirCoat GM 4100 AC, Operating Manual

Page: 25 / 52

25
VERSION 01/2018 ORDER NUMBER DOC 394821
7.4 CHANGING AIRCOAT NOZZLE
NOTICE
Defective AirCoat nozzle!
Insufficient paint application quality.
Do not use sharp-edged objects to treat carbide on the AirCoat nozzle.
1. Relieve the pressure on the spray gun and
product pressure generator.
A
B
C
D
B_02263
B_02261
x
2. Secure the spray gun with the trigger locking
device.
3. Unscrew union nut (A).
4. Remove air cap (B).
5. Press AirCoat nozzle (C) out of air cap (B) by
hand and treat with cleaning agent until all
remaining paint has been dissolved.
Assembly:
6. Fit nozzle (C) in nozzle seal (D).
7. Fit air cap (B) over nozzle (C).
Note the flattened parts (X) on the nozzle and
in the air cap.
8. Fit the union nut with nozzle guard (A) and
tighten by hand.
7.4.1 CLEANING AIRCOAT NOZZLE
For disassembly and assembly of AirCoat nozzles, see Chapter 7.4 .
The AirCoat nozzle (C) can be placed into a cleaning solution which has been
recommended by the paint manufacturer.