WAGNER AG-19 Owner'S Manual Download Page 28

28

AG 19

GB

product is neither extended nor renewed. 
Once the guarantee period has expired, claims made against the guarantee 

or from the guarantee can no longer be enforced. 

3. Handling 

If defects can be seen in the materials, processing or performance of the 

device during the guarantee period, guarantee claims must be made 

immediately, or at the latest within a period of 2 weeks. 
The authorised specialist shop that delivered the device is entitled to accept 

guarantee claims. Guarantee claims may also be made to the service centres 

named in our operating instructions. The product has to be sent without 

charge or presented together with the original purchase document that 

includes details of the purchase date and the name of the product. In order 

to claim for an extension to the guarantee, the guarantee certificate must be 

included. 
The costs as well as the risk of loss or damage to the product in transit or by 

the centre that accepts the guarantee claims or who delivers the repaired 

product, are the responsibility of the customer. 

4. Exclusion of guarantee 

Guarantee claims cannot be considered 
  -   for parts that are subject to wear and tear due to use or other natural 

wear and tear, as well as defects in the product that are a result of 

natural wear and tear, or wear and tear due to use. This includes in 

particular cables, valves, packaging, jets, cylinders, pistons, means-

carrying housing components, filters, pipes, seals, rotors, stators, etc. 

Damage due to wear and tear that is caused in particular by sanded 

coating materials, such as dispersions, plaster, putty, adhesives, glazes, 

quartz foundation. 

  -   in the event of errors in devices that are due to non-compliance with 

the operating instructions, unsuitable or unprofessional use, incorrect 

assembly and/or commissioning by the buyer or by a third party, 

or utilisation other than is intended, abnormal ambient conditions, 

unsuitable coating materials, unsuitable operating conditions, 

operation with the incorrect mains voltage supply/frequency, over-

operation or defective servicing or care and/or cleaning.

  -   for errors in the device that have been caused by using accessory parts, 

additional components or spare parts that are not original Wagner 

parts. 

  -   for products to which modifications or additions have been carried out. 
  -   for products where the serial number has been removed or is illegible 
  -  for products to which attempts at repairs have been carried out by 

unauthorised persons. 

  -  for products with slight deviations from the target properties, which are 

negligible with regard to the value and usability of the device. 

  -  for products that have been partially or fully taken apart. 

Summary of Contents for AG-19

































Reviews: