WAGNER 2K COMFORT, Original Operating Manual

Page: 111 / 128

111
OPERATING MANUAL
VERSION 05/2017 ORDER NUMBER DOC 2357061
13.2 CONNECTION TABLE 2K COMFORT
The "2K COMFORT connection table" is delivered together with the system and must be
adapted for each conversion. It is available on the USB stick (see Chapter 1.4 ).
The table is divided into five sections:
Digital outputs
Name
Connection
signal
GND
connection
Cable No. Solenoid
valve
Hose No.
Fluid valve
element
Stroke
sensor
…
Q1 Ready X3:1C/D -- 10 -- -- L1 --
… … … … … … … …
D2
Q12 D2:X2_14 D2:X2_4 -- -- -- --
… … … … … … … …
Digital inputs
Name Connection signal
Cable No. Hose No.
Fluid valve
element
…
I1 Start X2:1B/C 30;501 -- S2;RC;Robo
… … … … … …
High-speed counters
Name Connection signal
Cable No.
Fluid valve
element
…
C1 -- X2:19B/C -- --
… … … … …
Analog outputs
Name Connection signal Cable No. EP valve Hose No.
Fluid valve
element
…
AO1 -- D2:X4_17 10 -- -- --
… … … … … … …
Analog inputs
Name Connection signal Cable No. Fluid valve element
…
AI1 -- D2:X4_1 -- --
… … … … …
Assignment in the
controller (touch panel)
Connection in the control
cabinet
Valve name in the circuit diagram
The connection table enables:
The recognition of free connections. Example: in the "Name" column of the "Digital
outputs" section 3 fields are empty 3 digital outputs are free.
The assignment of the names in the controller (e.g., D2 module, Q12 conneciton)
with the I/O modules connections in the control cabinet (e.g., D2:X2_14 connection).