www.wagan.com
4
Percussion Massage Belt by Wagan Tech
©2011 Wagan Corporation. All Rights Reserved
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation
5
User’s Manual—Read before using this equipment
UNIT INSTRUCTIONS:
Place the Percussion Massage Belt on your shoulders, back or legs as shown in the
Massage Areas section.
1. Connect the cable to a standard 110V AC power supply. After a beep, the
appliance will go into standby mode and the POWER LED will blink red.
2. Press the
M
(mode) button and the unit will switch to automatic mode. The
“AUTO” indicator will light green. The massager will automatically cycle
through all 20 different massage rhythm combinations over a 15 minute
program.
3. Press the
M
button again and the unit will switch to manual mode. The
“MANUAL” indicator will light red. The massager will run a single massage
combination continuously for 15 minutes. You can select a different massage
combination by pressing the
M
button repeatedly until getting the desired
pattern.
4. When the massager is operating: Press the
and
buttons to adjust
intensity levels. There are 10 levels for adjustment.
5. To stop the unit, press and hold the
M
button for 3 seconds, and the unit
will turn off.
Note: For both Automatic and Manual modes the massager will run for 15 minutes,
after which the timer will automatically shut it off. Allow the unit to cool for at least
15 minutes before reusing.
Note: The Percussion Massage Belt has a safety feature causing the massage
motors to shut off if overheated. If one or both massage motors does not activate,
allow unit to cool significantly before attempting to use again.
MASSAGE AREAS
The unit massages the shoulder, back, lumbar, legs or posterior with rhythmic
percussion. See illustrations below for usage examples.
Neck/Shoulders
Upper Back
Lumbar (Lower Back)
Legs
Posterior
