Solar e Power
™
Case 800 by Wagan Tech
®
10
EN
G
LIS
H
26 Ah AGM Battery
The Solar e Power Case is equipped with the latest in battery technology. Supplied batteries
combine the charging characteristics and compatibility of AGM valve regulated, sealed lead-acid
batteries.
These batteries are electrically compatible with AGM batteries for expansion and also follow AGM
charge characteristics. It is recommended that only AGM batteries be used for long term expansion
or replacement because they are more compatible with portable applications and do not spill or
leak.
CAUTION—Battery Life:
Repetitive quick deep discharging of any rechargeable battery will reduce the capacity and life of
the battery. Frequent charging will preserve battery life.
External Battery Terminals
Red and black terminals labeled “Battery Terminal” are located on the top panel of the Solar e
Power Case. Battery Terminals can be used for DC load applications greater than 20 amps. Care
must be taken to ensure that the battery is not over-discharged. Battery Terminals can be used to
connect additional (external) batteries to increase capacity of the battery bank.
CAUTION—Live Battery Terminals:
The Battery Terminals are connected to the internal battery. Proper care must be taken to keep
Battery Terminals covered (insulated) at all times when not in use.
DC INPUT
(+) RED
(−) BLACK
Battery Terminals
CHARGING THE SOLAR E POWER CASE
Make Sure The Solar e Power Case Is Fully Charged Before First Use.
It is important to charge the Solar e Power Case for 24 hours before initial use. Recharge after each
use. When storing for long periods of time, it is recommended to charge the battery once every 3
months. Failure to follow these instructions can damage the battery and reduce the battery’s ability
to hold a charge