Pure Line Inverters by Wagan Tech
®
15
www.wagan.com
TROUBLESHOOTING
PROBLEM: Low or No Output Voltage – Fault LED Lit
Reason
Solution
Poor contact with battery, inverter terminals
.
Clean terminals thoroughly. Reinstall and tighten.
PROBLEM: Inverter Auto Shut Down – Fault LED Lit
Reason
Solution
Battery voltage is below rated value.
Charge or replace battery.
Inverter is too hot (thermal shut down mode).
Allow inverter to cool.
Check for adequate ventilation.
Reduce the load on the inverter to the specified
TrueRated
™
power max output.
PROBLEM: Inverter Shut Down – Fault LED Lit
Reason
Solution
Equipment being operated draws too much power.
Do not use the equipment with this inverter; use a
higher wattage inverter.
PROBLEM: Inverter Shut Down – Yellow LED Lit
Reason
Solution
GFCI Tripped.
Disconnect appliances. To reset, turn off ON/OFF
switch and turn back on.
PROBLEM: Continuous Buzzing Sound
Reason
Solution
Input voltage is below rated value.
Keep input voltage above rated value.
Poor or weak battery condition.
Recharge or replace battery.
Poor or loose cable connection.
Inspect terminals and tighten all connections.
Inadequate power being delivered to the inverter or
excessive voltage drop.
Use heavier gauge DC cables.
Keep cable length as short as possible.
Summary of Contents for PURE LINE 1000
Page 47: ......