background image

Mini Stepper by Wagan Tech 

 

USER’S MANUAL — Please read before using this equipment. 

________________________________________________________________________________________________________________________________________________________________ 
 

 

 

www.wagan.com 

 

© 2005 Wagan Corporation. 

All Rights Reserved. 

Wagan and Wagan.com are trademarks used by Wagan Corporation. 

 
 
 
 

 

 

TIME READ-OUT SPECIFICATIONS 

 
TIME-----------------------------------------------00:00-59:59 Min  
REPS/MIN----------------------------------------0-9999 Reps/Min  
COUNT------------------------------------------------0-9999 Times  
CALORIES-----------------------------------------------0-9999 Cal  
 

 
METER FUNCTION 

 
MODE:  1. This key allows you to select and lock on to a  
                   particular function you want.  
               2. Hold the key for 3 – 4 second to have all function  
                   values reset. (total reset)  
RESET:  The unit will be reset by pressing the key. 
 

OPERATION PROCEDURES 

 
AUTO ON/OFF:   

1.

 

The system turns on when any key is pressed orwhen it 
senses an input from the speed sensor. 

2.

 

The monitor will be automatically shut off if 
there is no signal in 4 or 5 minutes. 

 
FUNCTION: 
TIME:   

1.

 

Press  the MODE key until the pointer advance to 
TIME. 

2.

 

When the speed sensor receives any signal   input, it 
starts to count up. 

3.

 

It accumulates workout time when starting exercise. 

 

REPS/MIN:   

Displays current estimate repetitions per minutes during workout. 
 

 
COUNT:   

Displays accumulated workout steps since starting exercise 

 

CALORIES:  

1.

 

Press the MODE key until the pointer changes to CAL. 

2.

 

When the speed sensor receives any signal input, it starts to 
count up. 

3.

 

It accumulates calories consumed when starting exercise. 

 
SCAN:   

Automatic display of the following functions in the order 

shown: 
              TIME --> CALORIES --> SPEED (REPS/MIN) 

 
 
BATTERY 

 
1. Please replace the battery if improper display appears. 
2. The monitor operates on one AAA battery.

 

 
 
 

 
 

Summary of Contents for Mini Stepper Master






Reviews: