FRED Light
™
by Wagan Tech
®
4
www.wagan.com
©2013 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks used by Wagan Corporation.
BATTERy REPLACEMEnT
To replace the batteries:
1. unscrew the two screws completely on the bottom of the unit.
2. note the orientation of the two tabs at top.
3. Pull firmly on the plastic tabs to remove the cover plate.
nOTE: Initial seal may be difficult to open.
4. Replace the batteries in the proper orientation shown on the battery holder.
5. Align the two tabs on the battery cover to the notches on the outer
enclosure. Cover will not seal properly if not aligned to the notches.
6. secure the screws to ensure proper seal.
Pull firmly on
plastic tabs
Pull firmly on
plastic tabs
