USER’S MANUAL — Please read before using this equipment.
© 2007 Wagan Corporation.
All Rights Reserved.
Wagan and Wagan.com are trademarks used by Wagan Corporation.
7
Bluetooth Wireless Handsfree Car Kit
By Wagan Tech
www.wagan.com
8
* ‘Hands free Profile’ supports ‘Caller ID display’, ‘Voice dial’, ‘Redial the last
number’, ‘Call waiting’ and ‘Call transfer’ functions. If the mobile phone only
supports ‘Headset Profile’, those functions are not available.
Pairing with a phone
Before using the hands free, you must pair it with the mobile phone first. Once
the hands free and the phone have paired they store each other’s ID. Therefore,
they can connect to each other automatically. You can check, delete or rename
the paired device in the devices list of the mobile phone.
Connect / Reconnect to your phone
1. Place the Bluetooth hands free and your Bluetooth mobile phone within a
distance of 1 meter.
After the hands free is turned on, it is in idle mode. It is waiting to be paired or
connected to your Bluetooth mobile phone. The LED indicator flashes blue every
5 seconds indicating this mode. When the hands free and the cell phone are
disconnected, the hands free will return back to idle mode.
2. Switch on your Bluetooth mobile phone and enable the Bluetooth feature.
* If the phone has 'Profile' options, you are recommended to select 'Hands free
Profile' rather than ‘Headset Profile.’
To connect with phone
3. Turn on the hands free. The LED indicator will flash blue every 5 seconds to
indicate it is in idle mode.
EITHER
To connect with paired phone or reconnect with previously connected phone, click
Multifunction Key once. The hands free will search and connect to the nearest
phone automatically. (The LED indicator flashes blue every second indicating the
searching mode. The searching may last for 1/2 minute. If no phone can be found,
the hands free will return to idle mode.)
4. On your Bluetooth mobile phone, when searching for device, '
HF009
' will
appear in the device list.
5. Select device '
HF009
' and enter fixed pass key '
8888
'. Pairing completed. The
LED indicator turns blue steadily indicates the hands free is connected to the
phone with Hands free Profile
OR
.6. Make sure the paired mobile has returned to main menu.
To connect with the hands free through the phone, in the setting menu of the
phone, select ‘HF009’ from ‘Paired Device’. Select ‘connect’ and the phone will
connect to the hands free.
7. The volume is automatically set to middle level. For best performance, press
'+' or '-' to adjust a suitable volume level.
Check if the mobile displays any messages or icons which indicate the
connecting status. After the pairing is completed, some phones automatically
connect to hands free immediately. Some phones keep waiting for manual
connection. In this case, press Multifunction Key once, BTHF009D Plus will
connect to the phone. Or you can select 'HF009' from the "Paired Device' of the
phone. The phone will connect to the hands free. Please refer to your phone's
user manual.
Hands free Functions
Receive call
When hands free is ringing, the LCD displays the calling
number. Press Multifunction Key once to receive the call and
‘Active Call’ will be displayed.
Reject call
When hands free is ringing, the LCD displays the calling
number. Press Multifunction Key twice to reject the call and
‘BLUETOOTH’ will be displayed.
End call
During a call, press Multifunction Key once. LCD displays
‘BLUETOOTH’.
Switch to/from waiting
call(call waiting)
When a second call dials in during the call, the LCD displays
the second calling number.
1. The incoming call will be rejected if no action is taken after 8
seconds.
2. You can also reject the incoming call by double clicking the
You should now be able to make wireless communication with the hands free.
Keep the distance between the hands free and the mobile within 10 meters and
free from obstacles. You can dial and receive calls by the phone, or activate the
voice dialing, redial the last number and receive calls through the hands free.
