background image

User’s Manual—Read before using this equipment

1

Thank you for purchasing the iOnBoost

 V8 Torque by Wagan Tech

®

. With normal care and 

proper treatment, it will provide years of reliable service.

IMPORTANT INFORMATION

• Before using this unit, read and understand all instructions included in this manual as well

as those published by your vehicle’s battery manufacturer or any other device intended to 

be used with this unit. Failure to follow all listed instructions may result in electric shock, fire, 

and/or serious personal injury.

• Make sure the iOnBoost is fully charged before first use.

GENERAL WARNINGS

• This appliance is NOT intended for use by persons with reduced physical, sensory, or

mental capabilities.

• Children or persons lacking in experience and knowledge also should NOT operate this

appliance unless he/she has been given supervision or instruction concerning the proper

usage and warnings of the appliance by a person responsible for their safety.

• For proper and safe operation of any accessory outlet, do not place anything in it except

the plug of the accessory to be used.

• Use only the charging adapters and jumpstarting clamps provided in this package.

Unauthorized parts may cause serious damage or injury.

• Wear complete eye and clothing protection when jumpstarting a vehicle. Do not touch eyes

while working with battery.

• Remove metal jewelry, such as rings, bracelets, necklaces, and watches while working with

a vehicle battery. These items can produce a short-circuit that may cause severe burns.

• Do not operate this unit in or around water. Exposure to excessive moisture will damage

the unit.

• Dropping, hitting, or otherwise applying excessive amounts of force to the iOnBoost

may damage the unit. This could result in loss of operation, electrical fire, or other

undesired outcome.

FEATURES

Jump Starter

• 800 peak Amps auto jump starter—ideal for cars, vans, SUVs, trucks, and more
• Powerful, rechargeable, 31.0 Wh 4-cell Lithium-ion Polymer battery
• Heavy duty booster clamps

USB Power Source

• 2 USB power ports (including one rapid-charge port) with 2.0 Amp output (each).

Summary of Contents for 7505











Reviews: