©2023 Wagan Corporation. All Rights Reserved.
Wagan Tech and
wagan.com
are trademarks of Wagan Corporation.
8. Press the "+" or "−" buttons to set the desired pressure. When the LCD
screen is displaying the target PSI, the LCD readout will blink 3 times at
User’s Manual—Read before using this equipment
4
the desired preset pressure, and it will then change back to the current
pressure of the item that you are inflating.
• Press the air pressure unit button to toggle between BAR, PSI, KPA.
9. Set the power switch to the "|" position to start the inflator. The inflator
will shut off automatically at the desired pressure that you have
programmed. The preset pressure can be changed during inflation by
pressing the pressure adjusting buttons (+/−) to the new desired pressure.
• To stop the tire inflator before it reaches the preset pressure, set the
power switch to the "O" position.
Once the inflator has shut off, set the power switch to the "O"
position.
11.
10.
Disconnect the valve adapter and power cord once the inflation is
complete. Store your tire inflator.
WARNING: DO NOT OVERINFLATE PRODUCTS BEYOND THE
MANUFACTURER’S RECOMMENDATIONS.
WARNING: NEVER LEAVE INFLATOR UNATTENDED WHILE IN USE.
CARE AND MAINTENANCE
• Use only mild soap and a damp sponge to clean compressor.
• Do not immerse any part in liquid.
