background image

Power Dome Compact Generator  by Wagan Tech 

 

USER’S MANUAL — Please read before using this equipment. 

________________________________________________________________________________________________________________________________________________________________ 
 

 

 

www.wagan.com 

 

© 2005 Wagan Corporation. 

All Rights Reserved. 

Wagan and Wagan.com are trademarks used by Wagan Corporation. 

 
 
 
 

 

 3 

BATTERY STATUS:

 

 

Press and hold the Battery Level Button. 

 

The Voltage Meter will show the battery level. 

 

13~15 Volt: Ready to use. 

 

12 Volt: Charge necessary 

 

Below 12 Volt: Charge immediately 

 

JUMPSTARTING 

 

1.

 

Turn ignition OFF. Turn off all accessories such as lights, radio, air 
conditioner, etc... 

2.

 

Make sure all switches on the Jumpstart System are turned OFF. 

3.

 

Securely connect the Red (+) clamp to your vehicle battery’s positive 
(+) battery terminal. 

4.

 

Do not connect to the negative terminal. Connect the black (-) clamp 
to a non-moving metal part of the vehicle. 

5.

 

Start vehicle. If vehicle does not start, wait 3 minutes before trying 
again (failure to wait may damage Jumpstart). 

6.

 

After vehicle starts, disconnect the black negative clamp first than the 
red positive clamp. 

 

USING AIR COMPRESSOR 

 
1.

 

Open compartment door at the back of the power center and pull out 
air hose. Make sure nozzle lever is in the UP position. 

2.

 

Attach the valve adapter to the valve stem of tires and push the valve 
adapter lever down to lock into place. 

3.

 

Turn compressor switch on front panel to ON position. 

4.

 

Monitor the pressure gauge while inflating. 

5.

 

When appropriate pressure has been reached, turn compressor OFF 
and disconnect hose. 

 
 

USING 110 VOLT 400 WATT AC INVERTER 

 
1.

 

Prior to connecting inverter, make sure the inverter switch in OFF position. 

2.

 

Prior to plugging in device, make sure the device is OFF and ensure the 
current draw of the device is max. 400 watt. 

3.

 

Connect the devices’ electrical plug into the inverter receptacle. 

4.

 

Press the inverter switch to the ON position. If the inverter is working 
properly, a green LED indicator will illuminate. Now turn ON the device. If 
the green indicator remains on, then the system is operating properly. If the 
inverter green LED light turns OFF, turn off the device then turn off the 
inverter immediately. See the trouble shooting guide. The inverter may have 
been over loaded or the input voltage may be too low. 

 
 
CAUTION: 
Some rechargeable devices are equipped with a separate charger, which can be 
connected into this inverter AC receptacle. However certain rechargeable devices 
are manufactured with built-in chargers (see device owner’s manual). This 
category of devices may cause internal damage to inverters and should not be used 
with this inverter. The temperature of the device must be monitored for the first 15 
minutes of operation. Abnormally elevated temperature of the device is an 
indication that they should not be used with this inverter. 
 

USING 12 VOLT DC POWER PORT 

 
1.

 

Remove the protective cover. 

2.

 

Plug in your 12 volt accessory. 

3.

 

Turn power port switch to ON. 

4.

 

At full charge the power center will power B/W TV, spotlight for 4 hours, 
mini-cooler for 3 hours, portable vacuum, coffee maker for 1 hour. 

Time may vary depending upon current draw of attached accessory. 
 
 
 
 

Reviews: