background image

WAGAN Corp. Limited Warranty

The WAGAN Corporation warranty is limited to products sold only in 

the United States. 

Warranty Duration: 

Product is warranted to the original purchaser for a period of from the original 

purchase date, to be free of defects in material and workmanship. WAGAN 

Corporation disclaims any liability for consequential damages. In no event will 

WAGAN Corporation be responsible for  any amount of damages beyond the amount 

paid for the product at retail. 

Warranty Performance: 

During the warranty period, a product with a defect will be replaced with a 

comparable model when the product is returned to WAGAN Corporation with an 

original store receipt. WAGAN Corporation will, at its discretion, replace or repair 

the defective part. The replacement product will be warranted for the balance of the 

original warranty period.  This warranty does not extend to any units which have been 

used in violation of written instructions furnished. 

Warranty Disclaimers: 

This warranty is in lieu of all warranties expressed or implied and no representative 

or person is authorized to assume any other liability in connection with the sale of our 

products. There shall be no claims for defects or failure of performance or product 

failure under any theory of tort, contract or commercial law including,but not limited 

to negligence, gross negligence, strict liability, breach of warranty, and breach of 

contract. 

Returns: 

WAGAN Corporation is not responsible for any item(s) returned without an official 

Return Authorization number (RA#). Please contact our customer service team by 

phone or email to obtain an RA#. You can also visit our website and chat with our team 

during our normal business hours. For more details and instructions on how to process 

a warranty claim, please read the “Returns” section under the “Contact” page on our 

website. WAGAN Corporation is not responsible for any shipping charges incurred in 

returning the item(s) back to the company for repair or replacement.
Register your product online at http://tinyurl.com/wagan-registration to be added to 

our email list. You will receive previews on our upcoming products, promotions, and 

events.
 

©2015

Summary of Contents for 000





















Reviews: