Assemble C700 on Door Lock
Your Warranty
CE Marking
This device has been tested to and conforms
to the regulatory requirements of the
European Union and has attained CE
Marking. The CE Mark is a conformity
marking consisting of the letters “CE”. The
CE Mark applies to products regulated by
certain European health, safety and
environmental protection legislation. The CE
Mark is obligatory for products it applies to:
the manufacturer affixes the marking in order
to be allowed to sell his product in the
European market.
This product conforms to the essential
requirements of the R&TTE directive
1999/5/EC in order to attain CE Marking. A
notified body has determined that this device
has properly demonstrated that the
requirements of the directive have been met
and has issued a favorable certificate of
expert opinion. As such the device will bear
the notified body number 0560 after the CE
mark.
The CE Marking is not a quality mark.
Foremost, it refers to the safety rather than to
the quality of a product. Secondly, CE
Marking is mandatory for the product it
applies to, whereas most quality markings
are voluntary.
Marking: The product shall bear the CE
mark, the notified body number(s) as
depicted to the right. CE 0560.
1
Insert Cylinder through door
( from outside )
2
Ready the small internal knob and put it on
the cylinder core.
3
Match the screw hole of the knob and
cylinder.
4
Turn the screw clockwise with the L – Shape
hex screwdriver ( enclosed ) to secure the
knob tightly onto the cylinder.
5
Turn internal knob to activate dead/latch
bolt and check if the cylinder is in the right
position; then insert M5 screw ( enclosed )
to fix cylinder with the door lock.
Your Warranty covers all manufacturers'
defects in workmanship and material. It does
not cover any unit that is damaged beyond
normal usage,by improper installations, by
contacts to chemicals, or any other acts or
omissions unsanctioned within the user manual.
All components are covered for one (1) year
after the date of purchase or installation from
supplier.
The user is required to provide dated proof of
purchase. Waferlock or its authorized
distributor will determine if there is a
warrantable condition associated with material
and/or manufacturing workmanship.
If the lock conforms to the warranty conditions,
the lock will be repaired free of charge. The
shipping freights would be at owner's expense.
The warranty does not include any further
obligation whatsoever, including but not
limited to the installation of the replacement
unit to the customer's lock.
All other warranties, express or implied, are
disclaimed. All collateral agreements, which
purport to modify this limited warranty, are of
no effect.
WFE TECHNOLOGY CORPORATION
Tel: 886-4-22300362 Fax: 886-4-22377995
No. 16 Ke Yuan 2nd Rd., Central Taiwan Science Park
Taichung city 407, Taiwan.
E-mail: [email protected]
