Waeco SinePower MSI924, Installation And Operating Manual

Page: 48 / 436

EN
Connecting the inverter SinePower
48
9.3 Connecting the 230 V power cable
(MSI1800T only)
➤
Connect the 230 V
w
connection cable with safety plug to the 230 V
w
in-
put jack (fig. 7 6, page 5).
➤
Connect the safety plug to the 230 V AC mains.
9.4 Connecting the 230 V output cable
(MSI1800T only)
!
➤
Connect the 230 V
w
connection cable with safety plug to the 230 V
w
out-
put jack (fig. 7 5, page 5).
9.5 Connect multiple appliances
(MSI1800T only)
The device is equipped at delivery with galvanic isolation. For the safe oper-
ation of multiple appliances, it is essential that a circuit breaker (residual cur-
rent circuit breaker) is built into the socket distribution circuit, see sample
circuit diagram in fig.
8 , page 5.
Sample circuit diagram legend:
WARNING!
Before connecting the 230V output cable, make sure the inverter
is switched off at the main switch.
No. in
fig. 8 ,
page 5
Explanation
1 230 V
w
power source
2 additional devices, e.g. battery charger, refrigerator
3 DC power source (battery)
4 Inverter
5 Set grounding bridge (At delivery: not set, shown by dotted
line)
6 Circuit breaker (residual current circuit breaker)
7 Socket distribution circuit for appliances