Waeco RPD190, Installation And Operating Manual

Page: 18 / 40

EN
Safety instructions RPD190, RPD218
18
2.2 Operating the device safely
D
DANGER!
 Do not touch exposed cables with your bare hands. This applies
especially when operating the device from the AC mains.
!
CAUTION!
 Before starting the device, ensure that the power supply line
and the plug are dry.
 If you connect the device to a battery, make sure that no food
comes into contact with the battery acid.
A
NOTICE!
 Do not use electrical devices inside the cooling device unless
they are recommended by the manufacturer for that purpose.
 Do not place it near naked flames or other heat sources
(heaters, direct sunlight, gas ovens etc.)
 Danger of overheating!
Always ensure sufficient ventilation so that the heat generated
during operation can dissipate. Make sure that the device is
sufficiently far away from walls and other objects so that the air
can circulate.
 Ensure that the ventilation vents are not covered.
 Do not fill the inner container with ice or fluid.

Never immerse the appliance in water.
 Protect the appliance and the cable against heat and moisture.

Make sure that foodstuffs do not touch the walls of the cooling
area.