WAECO USA
• Page 4
CHANGING THE FACE PANEL
After loosening the screws (1 and 3), the parts (2 and 4) can
be dismounted. Now the door panel can be pulled out.
CHANGING THE DOOR HINGE POSITION
Dismount the top hinge (1) and pull out the door. Unscrew
the locking hook (3) and pull out the locking bar. Dismount
the stopper (4) and place it on the opposite side. Complete
the locking system. Now exchange the position of the
fastener, (5) and hinges (1) and add the door.
TRANSPORT LOCKING SYSTEM
1. Door is closed and secured.
2. Securing device inactive; door can be opened.
3. Door secured in vent position; door is slightly opened.
INSTALLATION INSTRUCTIONS
FOR 12/24 VOLT REFRIGERATORS
In order to ensure adequate ventilation, air channels must be
provided over the entire width of the refrigerator as shown
in the sketch below.
ATTENTION:
Air circulation must never be restricted or even
interrupted.
min. 1.9”
w
ar
m
o
ut
go
in
g
ai
r
w
ar
m
o
ut
go
in
g
ai
r
co
ld
in
co
m
in
g
ai
r
co
nd
en
se
r
m
in
. 1
.1
”
w
it
h
fa
ce
p
an
el
1
.9
”
