Waeco PerfectView CAM50, Installation And Operating Manual

Page: 31 / 44

Safety and installation instructions
PerfectView M5L, M7L, M7LX
EN 24
2 Safety and installation instructions
Please observe the prescribed safety instructions and stipulations from the vehicle
manufacturer and service workshops.
The manufacturer accepts no liability for damage in the following cases:

Faulty assembly or connection
 Damage to the product resulting from mechanical influences and excess voltage
 Alterations to the product without express permission from the manufacturer
 Use for purposes other than those described in the operating manual
A
NOTICE! Risk of damage!
 To prevent short circuits, always disconnect the negative terminal of the elec-
trical system before working on the vehicle.
If the vehicle has an additional battery, its negative terminal should also
be disconnected.
 Inadequate supply cable connections could result in short circuits which:
– Cause cable fires
– Trigger the airbag
– Damage electronic control devices
– Cause electric functions to fail (indicators, brake light, horn, ignition, lights)
Please observe the following instructions:
 When working on the following cables, only use insulated cable lugs, plugs and tab
sleeves:
–
30 (direct supply from positive battery terminal)
– 15 (connected positive terminal, behind the battery)
– 31 (return cable from the battery, earth)
– 58 (reversing light)
Do not use plastic terminal strips.
 Use a crimping tool (fig. 1 11, page 2) to connect the cables.
 When connecting to supply cable 31 (earth), screw the cable
–
To the vehicle’s earth bolt with a cable lug and a gear disc or
– To the sheet metal body work with a cable lug and a self-tapping screw
Ensure that there is a good earth connection.
When the negative terminal of the battery is disconnected, all data stored in the volatile
memories will be lost.
 The following data must be set again, depending on the vehicle equipment options:
–
Radio code
– Vehicle clock
– Timer
– On-board computer
– Seat position
You can find instructions for making these settings in the appropriate operating
instructions.
_M5L_M7L_M7LX.book Seite 24 Montag, 7. Mai 2012 10:59 10