Waeco Mobitronic RV-RMM-56, Installation And Operating Instructions Manual, Page: 19 / 87

19 19
Necessary tool
Scope of delivery
The following are required for the installation:
– Scale (ruler) (see B 1) – drilling machine (see B 5)
– Prick punch (see B 2) – screwdriver (see B 6)
– Hammer (see B 3) – screwdriver (see B 7)
– Drill (see B 4)
The following are required for the electrical connection and the check:
– Diode test lamp (see B 8) – hot-air drier (see B 12)
or voltmeter (see B 9) – hatchet iron (see B 13)
– Crimp pliers (see B10) – soldering tin (see B 14)
– insulation tape (see B11)
Due to your individual assembly, perhaps you still need other screws,
nuts, washers, metal screws and cable clips than those contained in the
scope of supply.
Quantity Designation
1 5.6” LCD monitor in the folding housing (see C 1)
1 Connection box with connection line to the monitor
and connecting lead (voltage supply) (see C 2)
1 IR remote control incl. battery (see C 3)
1 Mounting plate (see C)
Assembly material
1 Installation- / operating instructions
RV-RMM-56_q4.qxd 03/09/03 11:01 Page 19