Introducing a new hand transmitter
The magic safe MS-650 system can accommodate up to 3 hand
transmitters. To use a new hand transmitter with your system it is simply
necessary to introduce the transmitter to the system as follows:
61
61
Switch the ignition on.
Input the first number of the pin-code
(Example: Press the access switch the same number 4 times
with PIN Code 45).
Switch the ignition off and then on again.
Input the second number of the pin-code.
(Example: Press the access switch the same number 5 times
with PIN Code 45).
Switch the ignition off and then on again.
The system will give two short acknowledging tones of the
siren to confirm it has
entered learn mode.
Press the blue button of the hand transmitter.
The system will give a short acknowledging tone to confirm
that the hand transmitter is introduced.
Switch the ignition off.
Press the access switch or wait approx. 15 sec.
for to leave the learn mode.
A double tone indicates the normal mode again.
MS-650.qxd 13/08/03 12:58 Page 61